Some Features of LED power supply / LED driver
(1) high reliability
Especially like LED street lamp drive power supply, installed in high altitude, maintenance is not convenient, the cost of maintenance is also big.
(2) high efficiency
LED is an energy-saving product, which drives the efficiency of power supply.
It is very important for power supply to be installed in the lamp.
The efficiency of power supply is high, its loss power is small, heat in lamps and lanterns is small, also reduce the temperature rise of lamps and lanterns.
It is advantageous to delay the light of LED.
(3) high power factor
Power factor is the requirement of power grid for load.
There are no mandatory indicators for household appliances under 70 watts.
Although the low power factor of a single electric appliance with low power has little impact on the power grid, the use of lighting in the evening is large and the same kind of load is too concentrated, which can cause serious pollution to the power grid.
For 30-watt-40 watts LED power supply, it is said that there may be some indicators of power factors in the near future.
(4) driving mode
There are two types of traffic: one is a constant pressure source for multiple constant current sources, and each constant current source is supplied to each LED.
This way, the combination of flexible, LED failure, does not affect the work of other leds, but the cost will be slightly higher.
The other is direct current constant current power supply, which is "zhongke huibao" to adopt the mode of drive, LED series or parallel operation.
It has the advantage of low cost, poor flexibility, and the need to solve an LED failure without affecting other LED running problems.
These two forms coexist for a period of time.
Multi-channel constant current output power supply mode can be better in cost and performance.
Maybe in the future.
(5) surge protection
The ability of LED surge resistance is poor, especially anti-reverse voltage.
It is also important to strengthen the protection of this aspect.
Some LED lights are installed outdoors, such as LED street lamps.
Due to the load of the power grid and the lightning strike, the power grid system will invade all kinds of waves, and some surge can lead to the damage of the LED.
Therefore the driving power of analysis "zhongke hui bao" in surge protection should have certain lack of, and as for the power supply and frequent replacement of lamps and lanterns, LED drive power to suppress surge intrusion, protect the LED is not damaged.
(6) protection function
In addition to the conventional protection function, it is better to increase the negative feedback of LED temperature in the constant current output to prevent LED temperature.
Comply with safety and electromagnetic compatibility requirements.
- LED Lamp You Are Worth Having
- Why LED Tube Energy-saving Pollution?
- Promote Energy - Efficient Lighting...
- Let LED Lights Illuminate Our World
- LED Lamp Beads That Affect The LED ...
- How Should I Choose LED Light Sourc...
- Advantages And Disadvantages Of LED...
- How To Improve The Level Of LED Lam...
- LED Junction Temperature Is How To ...
- LED Flood Light Performance Charact...
- What Types Of Leds Are Susceptible ...
- What Are The Implementation Modes O...
- LED Tube Light Appear Dark Spot, Wh...
- About Plant Lighting: 5 Species Of ...
- Why Are There No Street Lights On T...
- 30W E27 E40 LED Corn Light With 3 Y...
- Two Models Of 40W LED Corn Light
- White COB LED Track Light
- How To Effectively Test The Start, ...
- A Brief Analysis Of The Four Myths ...