Commercial LED Track Lighting 40W 4000K
Product Name: commercial LED track lighting 40W 4000K /
Product Code: HSL-TR40WC /
IP Rate: IP44 /
Power: 40 Watts /
Base Holder: 2 wires, 3 wires, 4 wires /
Input Voltage: AC 85-265VAC 50/60Hz /
Power Factor(PF): >0.9
LED driver: Isolated with glue protected
LED Source: COB Epistar chip
Lumen Flux: 3000LM +/-3%
Lumen Efficiency: 100lm/W
CRI (Ra): >80Ra or >90Ra
Beam Angle: 15, 24, 60 degrees
Color Temperature: WW, NW,PW,CW
Materials: Aluminium body + reflector + Glass cover
Body Color: White / Black
commercial LED track lighting 40W 4000K
Features of commercial LED track lighting:
1. High heat dissipation, low light decay, lifespan can reach 50,000 hours;
2. No radiation, no heavy metal pollution, high brightness, low strobe;
3. Efficient optical lens, small optical loss, good illumination;
4. streamline design, beautiful appearance and easy installation;
5. Energy-saving and durable (Power consumption is only 110 of the ordinary incandescent lamp , lifespan expectancy is extended more than 100 times);
To receive a catalog,pricing information and a sample of commercial LED track lighting 40W 4000K for your needs,just leave an Inquiry to get a Quick Quotation by those contact way.
Q: The 2-wire is extremely hard to insert into original Lightolier tracks. I'm afraid I might break the fixture. What should I do?
A: It is a very tight fit, but nonetheless, it will work. As long as the track head goes in once, it is loosened, and can then easily be placed anywhere along the length of the track.
Q: Do your lights meet the specifications and recommendations?
A: Our lights each come with a data sheet setting out their specifications. Minimum lux levels and light output requirements can all be met with our lights.
Q: Are LED bulbs Dimmable?
A: Yes, some bulbs are dimmable. The majority of LED bulbs are not dimmable. LED components operate on DC current typically at 350 mA. Therefore every LED bulb contains a LED driver to convert the AC power to DC power. Special drivers are required if the bulb is to function with a standard voltage regulating wall dimmer such as those made by Lutron and Leviton. Therefore only install bulbs labeled as “Dimmable” in lighting circuits that contain dimmers. Topband brand dimmable LED’s are compatible with the standard Lutron P600 dimmer. If a non-dimmable bulb is installed into a dimmable circuit, the bulb may burnout, flicker, or dammage the dimmer. LED USA is not responsible for mis-use of LED bulbs and specifically is not responsible for non-dimmable bulbs operated with a dimmer.