2 Pin LED Replacement Bulbs G24 10W
Product Name: 2 pin LED replacement bulbs G24 10W /
Product Code: HSL-PL10WA /
IP Rate: IP44 /
Power: 10 Watts /
Base Holder: G24-2pin,G24-4pin, E27 /
Input Voltage: AC 85-265VAC 50/60Hz /
Power Factor(PF): >0.9
LED driver: Isolated with glue protected
LED Source: SMD2835 Epistar chip
Lumen Flux: 1000LM +/-3%
Lumen Efficiency: 100lm/W
CRI (Ra): >80Ra (If only Ra>70, the lamp will be more brighter)
Beam Angle: 180 degrees
Cover Type: Clear / Frosted
Color Temperature: WW, NW,PW,CW
Materials: Aluminium body + Aluminium PCB + PC cover
2 pin LED replacement bulbs G24 10W
Features of 2 pin LED replacement bulbs:
1. LED lights G24 are more energy saving than the CFL and the incandescent lamp;60% energy-saving than energy saving lamp;80% energy-saving than incandescent lamp.
2. G24 Light with extruded aluminum material crust disposed by oxide on the surface good for heat dissipation.
3. Constant voltage source and constant current source LED driver.
4. No shadow and shatter-resistant, Beam angle as widely as 120°,widely used.
5. Less than 65°C for surface temperature with multiple heat dissipation.
6. High brightness Epistar SMD 5730SMD, more than 85% efficiency.
To receive a catalog,pricing information and a sample of 2 pin LED replacement bulbs G24 10W for your needs,just leave an Inquiry to get a Quick Quotation by those contact way.
Q: Why don't LEDs function as efficiently in a traditional fixture housing?
A: An LED module may physically fit into an existing housing, but that housing doesn't leverage the inherent qualities of the LEDs. Standard housings can't handle the challenges of LED thermal management, which is vastly
different than thermal management for traditional incandescent or fluorescent lighting. Also, the optical design used in most traditional fixtures doesn't maximize the LED's efficiency.
Q: What is your main product line is made?
A: We mainly produce led application classes and industrial lighting fixtures. Including daily life indoor lighting,
like led corn light, led spotlight, led flood light, led track light,led tube etc.
Q: Can LEDs be dimmed?
A: It's useful to think of an LED as a current-driven device. The light output is proportional to the drive current over a decent range. Things go a bit odd at the bottom end of the current range, where the LED may flicker or change color. So dimming by reductions in forward current isn't the most useful technique. Instead, pulse width modulation presents a technique to safely dim an LED from 0 - 100% of its' nominal brightness. By pulsing the LED with current, and varying the duty cycle of the current waveform, the LED rapidly transitions between on and off, and the relative times spent give the impression of being dimmed. Pulse width modulators are electronic controlling devices that also add significant cost to the unit or design.