12 Volt MR16 LED Lamps
Product Name: 12 volt MR16 LED lamps /
Product Code: HSL-SP05WF /
IP Rate: IP44 /
Power: 5 Watts /
Base Holder: GU10 / MR16 /
Input Voltage: AC 85-265V OR DC 12V 50/60Hz /
Power Factor(PF): >0.9
LED driver: Isolated with glue protected
LED Source: 5W COB Epistar chip
Lumen Flux: 500lm +/-3%
Lumen Efficiency: 100lm/W
CRI (Ra): >80Ra
Beam Angle: 30, 45, 60 degrees
Color Temperature: WW, NW,PW,CW
Materials: Aluminium body + PMMA lens
12 volt MR16 LED lamps
(ii) use of environment:
1) indoor use: with the symbol, the outer surface of the metal parts shall be embalmed.
2) outdoor use: with the symbol, the outer surface of the metal parts shall be embalmed.
Special requirement: water spray test (i.e., require minimum Ф 3.
2mm water leakage hole), metal parts inside and outside should be embalmed.
1) DRY LOCATION: at most temporary humidity.
Such as living room, living room, kitchen and other indoor environment.
2) tidal environment (DAMP LOCATION) : at least periodic moisture liquefaction occurs.
The indoor humid environment such as the bathroom, crypto freezer and so on, as well as the outdoor environment covered by the balcony canopy, the door cover and so on.
3) WET LOCATION: at least rain or splash.
For example, underground, water and all outdoor environment and car wash can be poured into the water indoor environment.
Note: water spray test is the main requirement of wet environment and wet environment.
(2 mm), the outer surface of the metal parts shall be treated as anticorrosion, and the conductive contact of the lamp shall be corroded (copper terminal).