HOME SUN LED LIGHTING CO., LIMITED

High quality product, professional service, being the core supplier lighting field!

10 Watt MR16 LED Bulbs

10 Watt MR16 LED Bulbs

Product Name: 10 watt MR16 LED bulbs / Product Code: HSL-SP10WS / IP Rate: IP44 / Power: 10 Watts / Base Holder: GU10 / MR16 / Input Voltage: AC 85-265V OR DC 12V 50/60Hz / Power Factor(PF): >0.9
LED driver: Isolated with glue protected
LED Source: 10W COB Epistar chip
Lumen Flux:  1000lm +/-3%
Lumen Efficiency: 100lm/W
CRI (Ra): >80Ra
Beam Angle: 60 degrees
Color Temperature: WW, NW,PW,CW
Materials: Aluminium body + PMMA lens

Send Inquiry
Product Details

10 watt MR16 LED bulbs


10 watt MR16 LED bulbs

10 watt MR16 LED bulbs

10 watt MR16 LED bulbs

10 watt MR16 LED bulbs


10 watt MR16 LED bulbs

10 watt MR16 LED bulbs

10 watt MR16 LED bulbs

10 watt MR16 LED bulbs

10 watt MR16 LED bulbs

10 watt MR16 LED bulbs

10 watt MR16 LED bulbs


10 watt MR16 LED bulbs

10 watt MR16 LED bulbs


10 watt MR16 LED bulbs

10 watt MR16 LED bulbs


Tips:


Installation of LED underground lamp:

The outlet and inlet line of power supply from the embedded object at the bottom of the hole, then embedded inserts into the reserved hole fixed on the ground, or external to consolidate around its pouring concrete (concrete), so that it is fixed.Dial to thrum insulating layer, and then into the outlet line and the buried lights lead red (or block) line connected to the outlet and inlet line of the zero line connected to the blue line inlets buried lights, will protect the line and buried lights connected to the yellow green line of the lead wire (if there is a yellow green line);After the connection is strong, make insulation and waterproof treatment to the head.

The IP67 waterproof junction box should be used for connection in large rainfall areas.

After the connection has been checked, the floor lamp body shall be fixed with screws in the sleeve, and then the sealing ring, tempered glass and pressure plate shall be installed, and the screws shall be tightened.After all installed, turn on the lamp, it can work well.

The ground lamp must have a drainage layer of more than 20CM, and the drainage is to do 50cm of gravel under each floor lamp. The larger the diameter, the better, then spread the sand 20 - 50cm thick on the gravel, that's all ok.

10 watt MR16 LED bulbs


10 watt MR16 LED bulbs

 

Hot Tags:  GU10 LED Spotlight 5W Dimmable     6W GU10 LED Spots IP44 Indoors Lamp     LED 220V GU5.3 Lamp Bulbs 3W

MR11 LED Bulb Spot Lighting 35mm  Dimmable LED GU10 7W COB  LED Spot Lights 5W SMD GU10

Hot Tags: 10 watt mr16 led bulbs, manufacturers, suppliers, factory, wholesale, price
Related Products
Inquiry