LED UFO High Bay Light
Product Name: LED UFO high bay light
Product Code: HSL-HB150WF
IP Rate: IP67
Power: 150 Watts
Input Voltage: AC 90-305V 50/60Hz
Power Factor(PF): >0.9
LED driver: MeanWell
LED Source: SMD3030 Philip chip OR LG chip
Lumen Flux: 18000LM +/-3% OR 16500LM +/-3%
Lumen Efficiency: 120lm/W OR 110lm/W
CRI (Ra): >80Ra (If only Ra>70, the lamp will be more brighter)
Beam Angle: 60, 90, 120 degrees
Cover Type: Glass cover or PMMA lens
Color Temperature: WW, NW,PW,CW
Materials: Precision casting Aluminium
LED UFO high bay light
(1) Using forth-generation green high power and high brightness white light LED as light source. Adopt high-tech surface treatment reflector, high reflective efficiency. Light distance reaches 100m and visible distance is up to 5000m.
(2) Using high-energy memoryless battery, big capacity, long service life and low self-discharge rate.
(3) Low power consumption, average lifespan is up to 50, 000 hours.
(4) High hardness alloy lamp housing ensures the lamp can stand strongly impact, it also has good ability of bearing low high temperature, can be used in all kinds of harsh environment.
Q: Can I install the LED lights into the holder of halogen globes ? Is the transformer universal ?
A: Yes, you can. The holder is universal and there is no need to change it when using LED lights. As for the transformer, please check the output voltage of it before changing lights. For example, if the output voltage of GU10 is AC240V while that of MR16 is AC/C12V, you can directly change the lights without changeing holders. But you have to change the power supply if the voltage of MR16 is 24V.
Q: Can your LED lights be dimmed ? If so, what kind of dimmer can be used ?
A: So far, our LED lights are basically compatible with all the common dimmers in the market, such as PWM dimmer and SCR dimmers. Both the rising edge and failing edge can be used. FOr MR16, a 0-10V dimmer can be used.
Q: So what’s so good about your lights?
A: Lots of things. As well as being highly energy-efficient, our lights are suitable for retro-fit installation and new builds. This means they can be used to replace existing lights (especially inefficient halogens) and/or be installed into buildings being designed for the future. our lights are all thoroughly tested before they are released onto the market. They are all CE approved, ROHS compliant and all tested to meet minimum safety standards. They can be truly relied upon for longevity and for performance. That is why they carry guarantees – unlike most of the competition.