LED Bay Lights IP67
Product Name: LED Bay Lights IP67 /
Product Code: HSL-HB200WU /
IP Rate: IP67 /
Power: 200 Watts /
Input Voltage: AC 90-305V 50/60Hz /
Power Factor(PF): >0.9
LED driver: MeanWell
LED Source: SMD3030 Philip chip OR LG chip
Lumen Flux: 24000LM +/-3% OR 22000LM +/-3%
Lumen Efficiency: 120lm/W OR 110lm/W
CRI (Ra): >80Ra (If only Ra>70, the lamp will be more brighter)
Beam Angle: 60, 90, 120 degrees
Cover Type: Glass cover or PMMA lens
Color Temperature: WW, NW,PW,CW
Materials: Precision casting Aluminium
LED Bay Lights IP67
1. High intensity die-cast aluminum body.
2. Double-coupling IP67 protection, highest waterproof level.
3. Honeycomb and whole structure cooling technology,high efficient heat dissipation.
4. High luminous flux 120-130lm/W.
5. Multi functions design,meet the various of different installation ways.
6. Horizontal and vertical high-speed inner loop heat conduction technology to keep the Temperat Justure very low.
Q: How about the after sale service?
A: welcome to contact us at 24 hours per day, any question will be highly appreciated. hotline: 0086-755-32807115
Q: How long is the lifetime for the LED products?
A: The lifetime is about 50,000 hours
Q: What type of voltage and current do LED lights require to operate?
A: Conventional incandescent lamps are made to operate on standard AC power. Descrete LED chips themselves are designed to operate on DC current typically in the 350 mA range. As a result LED bulbs are designed with built in AC to DC converters that supply the correct current needed for the specific LED chips. LED lights may be used in place of traditional incandescent lamps without changing the fixture. Please note that most LED lights are not designed to be used with dimmers. Do not install an LED bulb into a dimmer controlled circuit with a properly designed LED lamp. Flourescent Tube lamps operate with a specific ballast. To install a T8 LED tube replacement, the flourscent ballast fixture must be removed or bypassed to provide the standard direct connection of the 110 VAC power to the T8 LED tube. One end of the tube receives the positive and one end receives the nuetral.