20w Corn Lamp LED Bulb
Product Name: 20w corn lamp LED bulb /
Product Code: HSL-CN24W /
IP Rate: IP64 /
Power: 20 Watts /
Base Holder: E40 / E39 / E26 / E27 /
Input Voltage: AC 85-265V OR DC 12V 50/60Hz /
Power Factor(PF): >0.9
LED driver: Isolated with glue protected
LED Source: SMD2835 26-28lm/led Epistar chip OR 30-34lm/led Epistar chip
Lumen Flux: 2600LM +/-3% OR 3600LM +/-3%
Lumen Efficiency: 130lm/W OR 180lm/W
CRI (Ra): >80Ra (If only Ra>70, the lamp will be more brighter)
Beam Angle: 360 degrees
Cover Type: Clear / Frosted
Color Temperature: WW, NW,PW,CW
Materials: Aluminium body + Aluminium PCB + PC cover + Fireproof PC base
20w corn lamp LED bulb
20w corn lamp LED bulb 6500K E26 E27
E40 / E39 / E26 / E27
AC 85-265V 50/60Hz OR DC 12V
Isolated with glue protected
SMD2835 26-28lm/led Epistar chip or 30-34lm/led Epistar chip
2600LM +/-3% OR 3800LM +/-3%
130lm/W OR 180lm/W
>80Ra (If only Ra>70, the lamp will be more brighter)
WW(2700-3500K), NW(4000-4500K),PW(5000-5500K), CW(6000-6500K)
Aluminium body + Aluminium PCB + PC cover + Fireproof PC base
Clear / Frosted
-15 deg C~+50 deg C
-25 deg C~+55 deg C
CE-EMC, CE-LVD, RoHS, C-tick, FCC, LM80
1. Passed CE&RoHS certification.
2. Isolated power supply inside, Universal input voltage from AC85-265V it's more safe.
3. Environment-friendly and no UV or IR radiation.
4. Heat dissipation,surface temperature usually stay below 65°.
5. Wide range of available operating voltage and low consumption.
6. 80% energy saving than the normal CFL light.
7. Use high LM 0.2W SMD Led as the light source.
8. Adopt Aluminum PCB and PC housing, beautiful and special design, excellent heat-diffusion of aluminum structure.
9. Plastic PC cover to insure the safety.
10. Durable structure &stable performance.
Q: We’ve heard they are very energy-efficient – is this true?
A: Yes. LEDs require very little electricity to power them up because they are extremely efficient. Their design converts approximately 90% of the electricity they consume into light. In a conventional light the figure is more like 10 – 15%, with the rest of the electricity effectively wasted in lost heat. Our downlighters, for example, draw only 5 Watts of electricity to light up, compared to 50 Watts drawn by a traditional halogen downlighter. That is a saving in electricity consumption of approximately 90%. Not bad when the cost of electricity is continually rising. All lights are LED-based and all are highly energy-efficient.
Q: What is High Power LED ?
A: A high power LED, sometimes referred to as a power LED, is one that is driven at a current of 350 mA or higher.
Q: What type of bases are available?
A: LED Bulbs are the perfect retrofit for your existing light fixtures. We have standard bases, candelabra, standard or Edison (E26) , mogul (E39), MR16 and other typical bases that are common with incandescent and halogen installations. For fluorescent tubes, we have bi-pin, single pin and HO Ends. We carry PL based bulbs in G23, GX23, G24 and GX24 bases.