AR111 220V LED Lamp GU10
Product Name: AR111 220V LED lamp GU10
Product Code: HSL-AR12WC
IP Rate: IP44
Power: 12 Watts
Base Holder: GU10
Input Voltage: AC 85-265V OR DC 12V 50/60Hz
Power Factor(PF): >0.9
LED driver: Isolated with glue protected
LED Source: 2X6W COB Epistar chip
Lumen Flux: 1200lm +/-3%
Lumen Efficiency: 100lm/W
CRI (Ra): >80Ra
Beam Angle: 25 degrees
Color Temperature: WW, NW,PW,CW
Materials: Aluminium body + reflector
AR111 220V LED lamp GU10
How to design LED lighting to extend the room space effect?
1. Smooth the walls:
Advice to make uniform wall with light, such as on the whole area is even light, can enlarge the space, the best wall also cooperate with paint color, light color such as white or light blue, grey, etc., have enlarge the space effect.
2. Put the wall lights on the corner and scatter the lights up and down:
The improvement of the common practice, it is in the four corners of the corner, install wall lamp, lights up and down or left and right sides of the wall lighting, will even, and lit up all the border, can make the room look bigger.
3. Use the lamp to make light source:
They were faced with low and high space, can use the floor lamp, and chimney are opening up and down, can let light irradiation upwards and downwards, can let the ceiling height spun, enlarge the space effect.
4. Place hidden lights under the cabinet:
The most common practice, it is in the shoe ark, porch ark, etc., do not connect with the ground, there is a gap of design from the ground, is the best place to hiding place indirect lighting, make cabinet put oneself in another's floating, have enlarge the space effect.AR111 220V LED lamp GU10