AR111 15W LED Bulb Lightings
Product Name: AR111 15W LED bulb lightings /
Product Code: HSL-AR15WA /
IP Rate: IP44 /
Power: 15 Watts /
Base Holder: G53 /
Input Voltage: AC 85-265V OR DC 12V 50/60Hz
Power Factor(PF): >0.9
LED driver: Isolated with glue protected
LED Source: 15W COB Epistar chip
Lumen Flux: 1425lm +/-3%
Lumen Efficiency: 95lm/W
CRI (Ra): >80Ra
Beam Angle: 10,16,36 degrees
Color Temperature: WW, NW,PW,CW
Materials: Aluminium body + reflector
AR111 15W LED bulb lightings
Phototype light source
Ceiling lamp is illuminant of type of illuminate all things namely, usually it is house advocate the lamp, also known as the background light, it can promote to some indoor light brightness, to provide the same light, whole room so won't produce clear shadow, light to and according to also have no serious contrast.
But since it must be used together with other light, it should not be very bright, with the lowest brightness compared to other light sources in the home.
It is the representation of structural lighting.
Illuminate the ceiling with lamps and lanterns, borrow by reflected light illuminates the space, at the same time also will guide the view to the ceiling direction, emphasize the feeling that the space is extending above.
In reflective lighting design, the emphasis is on the spread of light, so the lighting fixtures must be careful not to destroy the continuity of light.
The key point of maintaining continuity is that there is no gap between the lamp and the lamp, because it creates a shadow whenever there is a gap.
In order to prevent this situation, the LED lamps can be tilted to the configuration, so that the light source can be overlapped.
If you use a seamless lamp that can shine at both ends, it should be adjacent to the configuration, as well as to allow the light to continue.AR111 15W LED bulb lightings