IP65 20W LED Floodlight
Product Name: IP65 20W LED floodlight
Product Code: HSL-FL20W
IP Rate: IP65
Power: 20 Watts
PIR Sensor:Yes / No
Input Voltage: AC 85-265VAC 50/60Hz OR 12V AC/DC
Power Factor(PF): >0.9
LED driver: Isolated with glue protected
LED Source: 20W COB Epistar chip OR Bridgelux chip
Lumen Flux: 2200LM +/-3% OR 2600lm +/-3%
Lumen Efficiency: 110lm/W OR 130lm/W
CRI (Ra): >80Ra
Beam Angle: 120 degrees
Color Temperature: WW, NW,PW,CW
Materials: Aluminium body + Tempering Glass cover
Body Color: Black / Grey
IP65 20W LED floodlight
Features of 10w led flood light:
1. Bridgelux LED 45*45mil, high luminous lux , energy saving obviously.
2. Inventronics LED driver used , wide range voltage AC 100-277V.
3. Use the most efficiency integrated aluminum alloy, the completed lamp can work above 50000 hrs.
4. Aluminum alloy housing processed with anodization, solid in structure and withstand the corrosion.
5. Heat sink of different sizes from 10-200W, according to varied lighting requirement .
6. Protection rate : IP65 .
7. Flexible position makes project angle can be adjusted within 216°.
To receive a catalog,pricing information and a sample of IP65 20W LED floodlight for your needs,just leave an Inquiry to get a Quick Quotation by those contact way.
Q: How can I tell the difference between a 3-wire, 2-wire and a wide 2-wire fixture?
A: The overall look is exactly the same. We have made an improvement on the design of the transformer box, they are now low profile, small and unobtrusive. They differ in the way they each fit into the track. The adapter of a 3-wire fixture has three silver colored pins, two on one side, and one on the other. A 2-wire fixture has two silver pins. And the wide 2-wire fixture looks similar to the 2-wire fixture, except that the pins are farther apart, and one side is marked ‘P’. The wide 2-wire fixture may be adaptable to the two circuit track by pulling up the pin marked ‘P’, and inserting a ‘J-CLIP’ to hold it in place.
Q: What kind of dimmable lamps do you have?
A: We could do 0-100% dimming for LED spotlight, LED downlight, LED track light etc.
Q: Why don't LEDs function as efficiently in a traditional fixture housing?
A: An LED module may physically fit into an existing housing, but that housing doesn't leverage the inherent qualities of the LEDs. Standard housings can't handle the challenges of LED thermal management, which is vastly
different than thermal management for traditional incandescent or fluorescent lighting. Also, the optical design used in most traditional fixtures doesn't maximize the LED's efficiency.